SDSHobby
CARBON FIBER FOLD BOAT HOLDER FOR L400MM-900MM RC MODEL BOAT
Specifications:, Note:, The colors will be sent randomly.,
L1=26CM L2=17CM L3=19.2CMSDSHobby
CARBON FIBER LANDING GEAR CROSS TUBE D6*D4.5*L380MM FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 6mm, Inner Diameter:, 4.5mm, Length:, 380mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER LANDING GEAR TUBE D8*D6*L230MM WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 8mm, Inner Diameter:, 6mm, Length:, 30mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER SUPPORTING TUBE D8*D6*L230MM WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 8mm, Inner Diameter:, 6mm, Length:, 30mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER TUBE D14*D12*L170MM WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 14mm, Inner Diameter:, 12mm, Length:, 170mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER FUSELAGE LOWER PLATE WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Material:, carbon fiber, Surface Treatment:, 3K, Applications:, suitable for Bumblebee ST550,
SDSHobby
CARBON FIBER FUSELAGE UPPER PLATE WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Material:, carbon fiber, Surface Treatment:, 3K, Applications:, suitable for Bumblebee ST550,
SDSHobby
CARBON FIBER PATRON SAINT RC GASOLINE BOAT/ RACING BOAT WITH JAPAN ZENOAH 29CC GAS ENGINE
| Hull Length | 133mm |
| Hull Width | 38mm |
| Hull Height | 21mm |
| Hull Speed | 70-75km/h |
| Hull Material | carbon fiber |
| Gross Weight | 14KG |
| Engine | Japan Zenoah 29CC Gas Engine |
| Propeller | 6717 3 blades copper prop |
| Shaft System | D6.35 Shaft Jointer, D6.35mm Flexible Shaft, D6.35mm Drive Shaft without Teeth, D6.35mm Drive Dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including ClutchSDSHobby
EXTRA LONG ALUMINUM ALLOY 160 SINGLE RUDDER L150*H160 WITH 5.5MM DOUBLE WATER PICKUP FOR RC BOAT
| Outside Diameter of Water Pickup | 5.5mm |
Specification:, :150mm, :160mm, Features:,
Length of Rudder Height of Rudder It’s double suction hole. ...SDSHobby
EME 120CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 120cc |
| Weight | 2400g /engine, 160g/muffler, 150g/ignition |
| Carburetor | EME |
| Compression Ratio | 7.6 |
| Power | 12.2HP@7000RPM |
| Practical RPM | 1100~7200RPM |
| Thrust 1 | 27.2kgf (50~200M altitude) |
| Thrust 2 | 24.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades 28*10, 28*12, 29*10 prop, or 27*12 3 blades prop |
Specifications:, Package Contents:, EME120 engine*1pcs,
Muffler*2pcs Ignition module*1pcs Spark plug*2pcs Stand-off spacer*4pcs Muffler screw*4pcs Muffler ...